Skip to product information
1 of 2

Rear Lower Control Arm Wrangler JT

Rear Lower Control Arm Wrangler JT

Regular price Dhs. 400.00
Regular price Sale price Dhs. 400.00
- 0% Sold out

Car type: Wrangler JT

Part Number: 68264947AB

Model: 2020-2026

Product Description: Rear Lower Control Arm

Condition: Used

Side: Set
7 Days Warranty

Description

Rear Lower Control Arm - Jeep Gladiator JT Genuine OEM Used (Part Number: 68264947AB)

Genuine factory OEM used rear lower control arm (rear suspension lower control link) in excellent and very clean condition. Specifically compatible with Jeep Gladiator JT models (pickup truck platform), it serves as the primary structural foundation anchoring the rear differential axle housing to the chassis from underneath. It is engineered to withstand heavy towing payloads and high torque loads to ensure the rear tires remain in proper alignment in accordance with the highest factory quality standards. (This part is symmetrical and fits both the right and left sides).

Technical Specifications

Feature Details
Part Type Rear Lower Control Arm / Lower Suspension Control Link
Part Number 68264947AB
Condition Genuine OEM Used - 100% intact, structurally and mechanically inspected
Compatibility Jeep Gladiator (JT) for all trims and models from 2020 to 2026
Material Ultra-thick, high-rigidity forged carbon steel, specifically engineered for heavy-duty endurance, payload handling, and off-road/desert towing
Fitment & Installation Direct bolt-on installation into original lower factory chassis and rear axle mounting points without any modification
Side Symmetrical design, fits either side (Interchangeable Left/Right)

Technical Note: The rear suspension system on the Jeep Gladiator JT differs significantly from the Wrangler due to its extended wheelbase and payload-focused design. Consequently, the rear lower control arm here is longer and significantly more robust to absorb heavy payload vibrations and eliminate rear wheel hop or bouncing. This component has been meticulously inspected at our salvage facility to guarantee 100% structural straightness, remaining completely free of any bends, twists, or dents caused by rock strikes. Furthermore, the internal factory rubber bushings have been verified for hardness and a complete seal; worn-out lower bushings can cause an unsafe rear-end lunge or alignment drift under sudden acceleration, accompanied by annoying clunking noises. This part fits into place with millimeter precision, restoring your vehicle's alignment to factory specifications.

Warranty Instructions

Warranty and Return Policy at zoautoparts.com

At Zeyad Al Obaidi Car Spare Parts Trading, we are committed to providing diverse options that suit our customers' needs for American vehicles (Jeep, Dodge, Ford, and Chevrolet). Because we offer genuine, aftermarket, and used parts, we have detailed our warranty policy to ensure clarity and transparency for everyone:

1. Part Categories and Warranty Periods

The warranty period and type vary based on the condition of the sold part, as stated on the invoice:

  • Genuine Parts (OEM):Covered against manufacturing defects according to the manufacturer's (dealer's) policy.Period: [7 Days ] from the invoice date.
  • Aftermarket / Replacement Parts:Covered against manufacturing defects only.Period: [5 days] from the invoice date.Note: Aftermarket exterior body and modification parts (such as front bumpers, grilles, and hoods) must undergo a fitment test on the vehicle before painting. Any part that has been painted immediately loses its eligibility for return or exchange.
  • Used Parts:Used parts are sold with a "Startup/Operating Warranty" only.Period: [ 10 days] from the date of receipt.If the used part is an engine (such as EcoBoost for 4-cylinder models or others), the operating warranty ensures the engine is free from knocking sounds, abnormal oil consumption, or overheating during initial startup, provided it is installed immediately upon receipt within the specified warranty timeframe.

2. General Warranty Conditions

  • Nature of Business: We are a commercial spare parts trading company and do not provide repair or installation services. Therefore, the customer must verify the required part and bears the responsibility of choosing a specialized technical workshop for installation.
  • Proof of Purchase: No warranty claim will be considered without the original invoice (paper or electronic).
  • Authorized Installation: To maintain the validity of the warranty (for genuine, aftermarket, and used parts), installation must be performed at a workshop specialized in American cars. An installation invoice and a technical report detailing the defect must be provided when claiming compensation.

3. Warranty Exclusions

The warranty completely excludes the following cases:

  • Consumable Parts: (e.g., brake pads, belts, filters, spark plugs, and oils).
  • Electrical and Electronic Parts: (e.g., sensors, computers, and wiring harnesses), especially used or aftermarket ones. These cannot be returned once the packaging is opened or installed due to the high risk of damage from electrical short circuits in the customer's vehicle.
  • Installation Damage: Any breakage or damage resulting from incorrect installation or using the part in an incompatible vehicle (mismatched VIN).
  • Incidental Costs: The company does not bear any additional fees or costs paid by the customer (e.g., workshop labor fees, towing costs, or any damage caused to the vehicle by the part). The warranty is strictly limited to the value of the purchased part only.

4. Exchange and Return Mechanism

  1. Contact customer service with your order number and a copy of the invoice.
  2. Provide a technical report from the workshop proving the defect, along with photos or a video of the part (especially for used parts to document their condition).
  3. The part must be returned in the exact condition it was received (new and aftermarket parts must be in their original, undamaged packaging). For used parts, our thermal stamps, security seals, or markings must not be tampered with or removed.
  4. The customer bears the return shipping costs. Upon verification, the part will be replaced with a matching one, or the amount will be refunded if a replacement is unavailable in our inventory.
View full details
Selected Variant Image
Set
Regular price Dhs. 400.00
Regular price Sale price Dhs. 400.00
Selected Variant Image
Rear Lower Control Arm Wrangler JT
Set
Regular price Dhs. 400.00
Regular price Sale price Dhs. 400.00

FAQ's

Are prices negotiable?

Our prices are already competitive. However, special pricing may be available for bulk or workshop orders.

Do you sell parts for older car models?

Yes. We stock parts for both new and older models. If a part is not listed, contact us and we’ll try to arrange it.

What if the part doesn’t fit my car?

No worries. If the part is unused and in original condition, you can request a return or exchange according to our return policy.

How do I know if a part will fit my car?

Check the product description for compatibility details (make, model, year). If you’re unsure, contact us on WhatsApp with your car details and we’ll confirm fitment before you order.

Are your spare parts genuine?

Yes. We deal in genuine, OEM, and high-quality aftermarket parts. Each product clearly mentions its type in the description.