Rear Lower Control Arm Wrangler JL
Rear Lower Control Arm Wrangler JL
Car type: Wrangler JL
Part Number: 68612076AA
Model: 2018-2026
Product Description: Rear Lower Control Arm
Condition: Used
Couldn't load pickup availability
Description
Description
Genuine Rear Lower Control Arm | Jeep Wrangler JL (2018 - 2026) | Original Used - Zeyad Al-Obaidi Company 🛡️ 🇺🇸 Rear Axle Reinforcement & Guaranteed Factory Insulation and Stability Across Dunes and Terrains ⚙️ Rear Axle 🦅🔥
Maintain the integrity and strength of your rear suspension system and protect your Jeep Wrangler's underbody with this Genuine Used OEM Rear Lower Control Arm (Genuine Mopar OEM), geometrically engineered to fit both the Right Hand (Passenger) and Left Hand (Driver) sides of the off-road legend, the Jeep Wrangler JL, for models 2018 through 2026.
Rear lower control arms are among the most critical structural links in the suspension system; they bear the heaviest loads of propulsion, acceleration, and braking forces, connecting the lower section of the rear differential housing (Dana 44) directly to the vehicle's chassis frame. Their pivotal function is to maintain the correct wheelbase geometry and prevent the rear axle from shifting forward or backward during aggressive launching, while delivering maximum suspension articulation (flex) during rock crawling or driving through deep desert sands. Given their close proximity to the ground, they are highly vulnerable to direct impacts from sharp rocks, causing them to bend. Furthermore, their rubber bushings suffer from crushing and drying out under intense summer heat. This structural degradation immediately leads to dangerous rear-end sway at high speeds, accelerated rear tire tread wear, and the emergence of annoying metallic clunking and rattling sounds over every bump.
Choosing an "Original Used Factory" component with the exact interchangeable engineering part number 68612076AA guarantees you the high-density strength of factory steel and the heavy-duty endurance of original factory rubber bushings for a factory-spec alignment, all at the lowest possible cost compared to buying new. Zeyad Al-Obaidi Auto Spare Parts Trading Company offers these control arms in excellent factory condition, 100% straight, and thoroughly inspected mechanically.
✨ Features of the Genuine Used Rear Lower Control Arm for Wrangler JL (Mopar OEM):
-
100% Original Mopar Quality & Reliability (Genuine Mopar OEM): A certified factory-original replacement part that guarantees the highest standards of structural safety and security aligned perfectly with factory specifications.
-
Fully Interchangeable Matching Part Number: Carries the official factory-approved engineering number 68612076AA, featuring a symmetrical, millimeter-precise design that installs directly onto either the Right Hand (Passenger Side) or Left Hand (Driver Side) without variation.
-
Heavy-Duty Boxed Steel Construction: Manufactured from premium, high-strength hardened boxed steel alloys built to resist bending or cracking when scraping against off-road obstacles or absorbing violent terrain shocks.
-
Solid Vulcanized Factory Rubber Bushings: The internal rubber bushings on both ends of the arm are 100% structurally intact, retaining their factory elasticity and density to effectively dampen road vibrations, isolate noise, and completely prevent rear mechanical play.
-
Rust and Moisture-Resistant Factory Black Coating: The arm is fully protected with the original premium black powder coating that efficiently resists water, moisture, and fine desert dust infiltration.
📋 Technical Specifications & Part Condition:
| Feature | Details |
| Supplier | Zeyad Al-Obaidi Auto Spare Parts Trading Company |
| Part Name | Rear Lower Control Arm / Rear Lower Suspension Wishbone / Rear Trailing Arm (Genuine Rear Lower Control Arm) |
| OEM Part Number | 68612076AA (Interchangeable and matching for both Left and Right sides) |
| Brand | Mopar / Jeep Genuine Parts (Original Used Factory Part) |
| Full Compatibility | Modern Generation Jeep Wrangler (Wrangler JL) - 2-Door & 4-Door (All Trims) - Models: 2018 through 2026 |
| Part Condition | Original Used - Excellent factory condition, clean, 100% straight, and bushings are completely intact with zero cracking or play |
| Pickup & Delivery | Available at our warehouses in Sharjah Industrial Area 4, or via online order at zoautoparts.com |
💡 Why Buy the Genuine Used Rear Lower Control Arm (68612076AA) From Our Store?
Generic aftermarket or counterfeit control arms are manufactured from thin, sub-standard metals that quickly bend under the heavy structural weight and high torque output of 4x4 vehicles. This distortion throws off the rear differential alignment and can cause a sudden loss of vehicle control, combined with poor-grade rubber bushings that rapidly crush and tear, bringing back the annoying clunking noises. Choosing an "Original Used" option from our store provides you with the durable strength of factory iron, dealership safety standards, and proper alignment calibration at the lowest possible cost compared to the astronomical pricing of a brand-new part.
🛠️ Technical Advice from Zeyad Al-Obaidi Company: When replacing rear lower control arms, we always advise inspecting the overall condition of the rear upper control arms and shock absorbers to ensure the entire rear suspension system is fully sound. It is absolutely critical that the technician tightens and torques the mounting bolts only while the vehicle is sitting perfectly level on the ground with its full weight resting on the tires to prevent pre-loading twist and premature bushing failure.
We would also like to remind and emphasize to our valued customers that we are a trading company specialized strictly in providing and selling auto spare parts and body kits (brand new aftermarket and original used parts for American vehicles), and we are not an installation workshop. Therefore, we provide you with these guaranteed control arms to take directly to your trusted specialized mechanic or certified suspension specialist garage to complete the installation with absolute professionalism and safety!
Warranty Instructions
Warranty Instructions
Warranty and Return Policy at zoautoparts.com
At Zeyad Al Obaidi Car Spare Parts Trading, we are committed to providing diverse options that suit our customers' needs for American vehicles (Jeep, Dodge, Ford, and Chevrolet). Because we offer genuine, aftermarket, and used parts, we have detailed our warranty policy to ensure clarity and transparency for everyone:
1. Part Categories and Warranty Periods
The warranty period and type vary based on the condition of the sold part, as stated on the invoice:
- Genuine Parts (OEM):Covered against manufacturing defects according to the manufacturer's (dealer's) policy.Period: [7 Days ] from the invoice date.
- Aftermarket / Replacement Parts:Covered against manufacturing defects only.Period: [5 days] from the invoice date.Note: Aftermarket exterior body and modification parts (such as front bumpers, grilles, and hoods) must undergo a fitment test on the vehicle before painting. Any part that has been painted immediately loses its eligibility for return or exchange.
- Used Parts:Used parts are sold with a "Startup/Operating Warranty" only.Period: [ 10 days] from the date of receipt.If the used part is an engine (such as EcoBoost for 4-cylinder models or others), the operating warranty ensures the engine is free from knocking sounds, abnormal oil consumption, or overheating during initial startup, provided it is installed immediately upon receipt within the specified warranty timeframe.
2. General Warranty Conditions
- Nature of Business: We are a commercial spare parts trading company and do not provide repair or installation services. Therefore, the customer must verify the required part and bears the responsibility of choosing a specialized technical workshop for installation.
- Proof of Purchase: No warranty claim will be considered without the original invoice (paper or electronic).
- Authorized Installation: To maintain the validity of the warranty (for genuine, aftermarket, and used parts), installation must be performed at a workshop specialized in American cars. An installation invoice and a technical report detailing the defect must be provided when claiming compensation.
3. Warranty Exclusions
The warranty completely excludes the following cases:
- Consumable Parts: (e.g., brake pads, belts, filters, spark plugs, and oils).
- Electrical and Electronic Parts: (e.g., sensors, computers, and wiring harnesses), especially used or aftermarket ones. These cannot be returned once the packaging is opened or installed due to the high risk of damage from electrical short circuits in the customer's vehicle.
- Installation Damage: Any breakage or damage resulting from incorrect installation or using the part in an incompatible vehicle (mismatched VIN).
- Incidental Costs: The company does not bear any additional fees or costs paid by the customer (e.g., workshop labor fees, towing costs, or any damage caused to the vehicle by the part). The warranty is strictly limited to the value of the purchased part only.
4. Exchange and Return Mechanism
- Contact customer service with your order number and a copy of the invoice.
- Provide a technical report from the workshop proving the defect, along with photos or a video of the part (especially for used parts to document their condition).
- The part must be returned in the exact condition it was received (new and aftermarket parts must be in their original, undamaged packaging). For used parts, our thermal stamps, security seals, or markings must not be tampered with or removed.
- The customer bears the return shipping costs. Upon verification, the part will be replaced with a matching one, or the amount will be refunded if a replacement is unavailable in our inventory.
FAQ's
Are prices negotiable?
Our prices are already competitive. However, special pricing may be available for bulk or workshop orders.
Do you sell parts for older car models?
Yes. We stock parts for both new and older models. If a part is not listed, contact us and we’ll try to arrange it.
What if the part doesn’t fit my car?
No worries. If the part is unused and in original condition, you can request a return or exchange according to our return policy.
How do I know if a part will fit my car?
Check the product description for compatibility details (make, model, year). If you’re unsure, contact us on WhatsApp with your car details and we’ll confirm fitment before you order.
Are your spare parts genuine?
Yes. We deal in genuine, OEM, and high-quality aftermarket parts. Each product clearly mentions its type in the description.