Washer Fluid Level Sensor Charger/Challenger/C300
Washer Fluid Level Sensor Charger/Challenger/C300
Car type: Charger/Challenger/C300
Part Number:
Model: 2015-2024
Product Description: Washer Fluid Level Sensor
Condition: Aftermarket
Couldn't load pickup availability
Description
Description
Washer Fluid Level Sensor (Aftermarket) — Dodge Charger / Challenger / Chrysler 300
The Washer Fluid Level Sensor is the component responsible for monitoring the volume of fluid inside the windshield washer reservoir. It sends an electronic signal to the vehicle’s body control module, triggering the "Low Washer Fluid" warning light on your dashboard when the fluid drops below the safe threshold. This premium aftermarket replacement sensor is engineered to deliver the exact operational parameters of the original factory unit, ensuring highly accurate, timely alerts while preventing potential damage to the washer pump from running dry.
Technical Specifications
| Feature | Details |
| Part Type | Windshield Washer Fluid Level Sensor / Float Switch |
| Compatibility | Dodge Charger, Challenger, Chrysler 300 (2015-2024 Models) |
| Design | Engineered to sit flush with the original grommet opening at the base of the fluid reservoir |
| Condition | Brand-New Premium Aftermarket (OEM-matching standards) |
| Installation | Direct Plug-and-Play installation; presses easily into the rubber sealing grommet |
| Material | High-grade chemical-resistant polymer to prevent corrosion from concentrated washer fluids |
Technical Note: Over time, standard tap water or mineral-heavy washer solutions cause calcium scaling and sediment buildup to accumulate on the sensor's internal float mechanism. This scaling causes the sensor to get stuck, falsely indicating "full" or "empty" permanently on your dashboard.
Pro Tip: When replacing this sensor, it is highly recommended to install a brand-new rubber sealing grommet (seal) to prevent slow fluid leaks from the bottom of the reservoir. Additionally, thoroughly flush the empty reservoir bottle with clean water prior to inserting the new sensor to wash away any existing sediment that could prematurely foul the new component.
Warranty Instructions
Warranty Instructions
Warranty and Return Policy at zoautoparts.com
At Zeyad Al Obaidi Car Spare Parts Trading, we are committed to providing diverse options that suit our customers' needs for American vehicles (Jeep, Dodge, Ford, and Chevrolet). Because we offer genuine, aftermarket, and used parts, we have detailed our warranty policy to ensure clarity and transparency for everyone:
1. Part Categories and Warranty Periods
The warranty period and type vary based on the condition of the sold part, as stated on the invoice:
- Genuine Parts (OEM):Covered against manufacturing defects according to the manufacturer's (dealer's) policy.Period: [7 Days ] from the invoice date.
- Aftermarket / Replacement Parts:Covered against manufacturing defects only.Period: [5 days] from the invoice date.Note: Aftermarket exterior body and modification parts (such as front bumpers, grilles, and hoods) must undergo a fitment test on the vehicle before painting. Any part that has been painted immediately loses its eligibility for return or exchange.
- Used Parts:Used parts are sold with a "Startup/Operating Warranty" only.Period: [ 10 days] from the date of receipt.If the used part is an engine (such as EcoBoost for 4-cylinder models or others), the operating warranty ensures the engine is free from knocking sounds, abnormal oil consumption, or overheating during initial startup, provided it is installed immediately upon receipt within the specified warranty timeframe.
2. General Warranty Conditions
- Nature of Business: We are a commercial spare parts trading company and do not provide repair or installation services. Therefore, the customer must verify the required part and bears the responsibility of choosing a specialized technical workshop for installation.
- Proof of Purchase: No warranty claim will be considered without the original invoice (paper or electronic).
- Authorized Installation: To maintain the validity of the warranty (for genuine, aftermarket, and used parts), installation must be performed at a workshop specialized in American cars. An installation invoice and a technical report detailing the defect must be provided when claiming compensation.
3. Warranty Exclusions
The warranty completely excludes the following cases:
- Consumable Parts: (e.g., brake pads, belts, filters, spark plugs, and oils).
- Electrical and Electronic Parts: (e.g., sensors, computers, and wiring harnesses), especially used or aftermarket ones. These cannot be returned once the packaging is opened or installed due to the high risk of damage from electrical short circuits in the customer's vehicle.
- Installation Damage: Any breakage or damage resulting from incorrect installation or using the part in an incompatible vehicle (mismatched VIN).
- Incidental Costs: The company does not bear any additional fees or costs paid by the customer (e.g., workshop labor fees, towing costs, or any damage caused to the vehicle by the part). The warranty is strictly limited to the value of the purchased part only.
4. Exchange and Return Mechanism
- Contact customer service with your order number and a copy of the invoice.
- Provide a technical report from the workshop proving the defect, along with photos or a video of the part (especially for used parts to document their condition).
- The part must be returned in the exact condition it was received (new and aftermarket parts must be in their original, undamaged packaging). For used parts, our thermal stamps, security seals, or markings must not be tampered with or removed.
- The customer bears the return shipping costs. Upon verification, the part will be replaced with a matching one, or the amount will be refunded if a replacement is unavailable in our inventory.

FAQ's
Are prices negotiable?
Our prices are already competitive. However, special pricing may be available for bulk or workshop orders.
Do you sell parts for older car models?
Yes. We stock parts for both new and older models. If a part is not listed, contact us and we’ll try to arrange it.
What if the part doesn’t fit my car?
No worries. If the part is unused and in original condition, you can request a return or exchange according to our return policy.
How do I know if a part will fit my car?
Check the product description for compatibility details (make, model, year). If you’re unsure, contact us on WhatsApp with your car details and we’ll confirm fitment before you order.
Are your spare parts genuine?
Yes. We deal in genuine, OEM, and high-quality aftermarket parts. Each product clearly mentions its type in the description.