Rear Track Bar Assembly Wrangler JL-JT

Genuine Rear Track Bar Assembly | Jeep Wrangler JL (2018 - 2026) | Original Used - Zeyad Al-Obaidi Company 🛡️ 🇺🇸 Total Structural Control & Rear Differential Stability in Corners and Off-Road Conditions ⚙️ Rear Axle 🦅🔥

Maintain the structural and geometric stability of your rear axle and completely eliminate rear-end sway and body roll with this Genuine Used OEM Rear Track Bar Assembly (Genuine Mopar OEM), dedicated exclusively to the off-road legend, the Jeep Wrangler JL, across all its trims for both 2-door and 4-door configurations.

The rear track bar serves as the fundamental structural and mechanical pillar responsible for the lateral and transverse stabilization of the solid rear axle (Dana 44 rear differential housing). It extends transversely to connect the vehicle's chassis frame directly to the differential assembly. Its pivotal engineering function is to prevent the entire rear axle from shifting or vibrating side-to-side (lateral movement) while driving, keeping the rear wheel alignment perfectly centered down to the millimeter, while allowing the axle to articulate up and down freely with the coil springs and shock absorbers. Given the aggressive nature of driving a Jeep in the desert, jumping sand dunes, or upgrading to massive, heavy oversized tires (such as 35-inch or 37-inch tires), low-quality aftermarket or worn-out track bar bushings get crushed and torn, or the bar itself can bend from underbody rock impacts. This structural degradation immediately causes a dangerous rear-end sway or fishtailing at high speeds, steering wheel misalignment, and loud clunking noises behind the cabin over bumps, acting as an indirect trigger for violent steering wheel vibrations.

Choosing an "Original Used Factory" component with the exact updated engineering part number 68320342AC guarantees you the high-density strength of factory solid steel and the heavy-duty endurance of original factory rubber bushings for a factory-spec alignment, all at a smart economic price. Zeyad Al-Obaidi Auto Spare Parts Trading Company offers this track bar in excellent factory condition, 100% straight, and thoroughly inspected mechanically.

✨ Features of the Genuine Used Rear Track Bar for Wrangler JL (Mopar OEM):

• 100% Original Mopar Quality & Reliability (Genuine Mopar OEM): A factory-original structural replacement part engineered to withstand massive lateral shear and compression forces generated by the acceleration of powerful V6, Turbo, and mighty 392 engines amidst sand dunes.

• Guaranteed Updated Matching Part Number: Carries the official factory catalog-approved updated engineering number 68320342AC (superseding previous part numbers 68320342AA and 68320342AB), ensuring absolute millimeter-accurate compatibility with original mounting bolt dimensions without any modifications.

• Heavy-Duty Solid Steel Construction: Manufactured from premium heat-treated and mechanically processed solid steel alloys engineered to resist bending and twisting, protecting the rear differential alignment from shifting during violent suspension articulation (flex) over rocks.

• Solid Vulcanized Factory Rubber Bushings: The rubber bushings on both ends of the bar are 100% structurally intact, retaining their factory elasticity and hardness. This ensures complete dampening of rear axle vibrations and entirely prevents any play.

• Rust-Resistant Factory Black Coating: The bar is finished with the original premium black powder coating that resists underbody scratches, moisture, and valley waters.

📋 Technical Specifications & Part Condition:

💡 Why Buy the Genuine Used Rear Track Bar (68320342AC) From Our Store Instead of Aftermarket?

Generic or low-grade aftermarket track bars flooding the market are equipped with weak rubber bushings that rapidly crush and harden under extreme heat and off-road conditions. This re-triggers axle play and vehicle body roll just a few short weeks after installation, alongside the subpar quality of commercial steel that can easily bend, causing uneven rear tire tread wear. Choosing an "Original Used" option from our store provides you with the durable strength of factory iron and secure engineering alignment to protect your vehicle for years at the lowest possible cost compared to buying brand new from the dealership.

🛠️ Technical Advice from Zeyad Al-Obaidi Company: When replacing the rear track bar, always ensure that the technician tightens the mounting bolts while the vehicle is sitting perfectly level on the ground with its full weight on the tires. Avoid torquing the bolts while the vehicle is suspended on a lift, as this twists the bushings incorrectly, leading to rapid failure. It is also imperative to use the strict factory-recommended torque specifications to prevent the mounting holes from expanding.

We would also like to remind and emphasize to our valued customers that we are a trading company specialized strictly in providing and selling auto spare parts and body kits (brand new aftermarket and original used parts for American vehicles), and we are not an installation workshop. Therefore, we provide you with this guaranteed structural track bar component to take directly to your trusted specialized mechanic or certified alignment specialist to complete the installation with absolute professionalism and safety!